- Toy Supplier: Private Seller
- Island: Efate
- Area: Bellevue
- Primary phone number: 7753692
- Email: firstname.lastname@example.org
- Listed: September 4, 2017 5:56 pm
- Expires: 18 days, 20 hours
Small indoor flyer, clone of the Blade Inductrix, best way to learn flying rc models indoor by far and you can bring it everywhere. Setup almost ready for fpv (just need a camera mount and a camera+vtx)
One Key Automatic Return / 3D Flip / Headless Mode / Speed Switch / Homemade yaw speed control
Here is the rebuild of a Furibee F36 improved with Racerstar 615 fast motors black edition
Modded transmitter with a toggle switch at the back to control the rotation speed (yaw in speed 2 mode is really fast on this flight controller so you can decrease the rotation speed in mode 2 and keep the original speed for mode 1 by switching the toggle)
Fast and agile. This is the best indoor flyer you can get and a good base if you want to add a fpv camera to make a so famous tiny whoop for racing or cruising (motors are powerful and can easily lift an AIO fpv camera)
Can also fly outdoor if no wind
This frame 67mm motor to motor with ducted fans allows to bump and crash into everything without damaging propellers and motors, propellers will not scratch your face or rip your pets and plants.
this little bad boy + modded F36 transmitter + original 150mah battery + usb battery charger
+ extra power battery charsoon 220mah 50C with foamy battery tray adapter
+ extra set of 3 blade propellers, they will give little less thrust but more speed and longer flight time (4 blade are better if you add a camera)
already fitted with 2 extra battery connectors if you find more batteries (compatible with losi connectors + PH 2.0) and you can also plug a micro fpv camera 🙂
Racerstar motors spin fast so they heat up fast, let the motors cool down 5/10 minutes between each flights to give them a better lifetime and to keep the best performance. Never fight against the wind or you will burn your motors.
Batteries are good, only a few charges. Never keep them fully charged when not in use.
Don’t miss it, it’s a lot a fun, durable and a quality build as I used to. I can replace broken frame and weak motors if needed later.